GnssLogger App
Praktičan alat za analizu, vizualizaciju i bilježenje podataka o lokaciji i senzorima Androida!
Podaci O Aplikaciji
Advertisement
Opis Aplikacije
Analiza I Pregled Android Aplikacija: GnssLogger App, Razvijen Od Developed with Google. Navedeno U Kategoriji Alati. Trenutna Verzija Je V6Q, Ažurirana Na 03/07/2025 . Prema Recenzijama Korisnika Na Google Playu: GnssLogger App. Postignute Više Od 61 Tisuća Instalacije. GnssLogger App Trenutno Ima 322 Recenzije, Prosječna Ocjena 4.4 Zvijezda
GnssLogger od Googlea omogućuje dubinsku analizu i bilježenje svih vrsta podataka o lokaciji i senzora kao što su GPS (Global Positioning System), mrežna lokacija i drugi podaci senzora. GnssLogger je dostupan za telefone i satove. Dolazi sa sljedećim značajkama za telefone:POČETNA KARTICA:
● Upravljajte raznim zapisima podataka kao što su sirova GNSS mjerenja, GnssStatus, NMEA, navigacijske poruke, podaci senzora i RINEX zapisnici.
KARTICA DNEVNIKA:
● Pregledajte sve podatke o lokaciji i neobrađene mjerenja.
● Upravljajte izvanmrežnim zapisom koristeći 'Pokreni zapisnik', 'Zaustavi i pošalji' i 'Određeni zapisnik'.
● Omogućite bilježenje određenih stavki pomoću odgovarajućih prekidača na kartici Početna.
● Izbrišite postojeće log datoteke s diska.
KARTICA KARTA:
● Vizualizirajte na GoogleMapu, lokaciju koju daje GPS čipset, Network Location Provider (NLP), Fused Location Provider (FLP) i izračunatu Weighted Least Square (WLS) poziciju.
● Prebacivanje između različitih prikaza karte i vrsta lokacije.
KARTICA PARCELE:
● Vizualizirajte CN0 (snagu signala), PR (pseudorange) ostatak i PRR (pseudorange rate) ostatak u odnosu na vrijeme.
KARTICA STATUS:
● Pogledajte detaljne informacije o svim vidljivim satelitima GNSS (Globalni navigacijski satelitski sustav) kao što su GPS, Beidou (BDS), QZSS, GAL (Galileo), GLO (GLONASS) i IRNSS.
KARTICA SKYPLOT:
● Vizualizirajte podatke svih vidljivih GNSS satelita koristeći skyplot.
● Pogledajte prosječni CN0 svih satelita u prikazu i onih korištenih u fiksiranju.
KARTICA AGNSS:
● Eksperimentirajte s funkcijama Assisted-GNSS.
KARTICA WLS analize:
● Pregledajte ponderirani položaj najmanjeg kvadrata, brzinu i njihove nesigurnosti izračunate na temelju neobrađenih GNSS mjerenja.
● Usporedite WLS rezultate s prijavljenim vrijednostima GNSS čipseta.
Dolazi sa sljedećim značajkama za satove:
● Pregledajte informacije o statusu GNSS čipseta u stvarnom vremenu.
● Bilježite razne podatke GNSS-a i senzora u CSV i RINEX datoteke.
Trenutno Nudimo Zadnju Verziju Ažuriranu 03/07/2025 . Ovo Je Naša Najnovija, Najoptimiziranija Verzija. Prikladan Je Za Mnogo Različitih Uređaja. Besplatno Preuzmite Izravno Apk Iz Google Play Store -A Ili Drugih Verzija Koje Ugošćujemo. Štoviše, Možete Preuzeti Bez Registracije I Nije Potrebna Prijava.
Imamo Više Od 2000+ Dostupnih Uređaja Za Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ... S Toliko Opcija, Lako Vam Je Odabrati Igre Ili Softver Koji Odgovara Vašem Uređaju.
To Može Biti Korisno Ako Postoje Bilo Kakva Ograničenja Zemlje Ili Bilo Kakva Ograničenja Sa Strane Vašeg Uređaja U Google App Storeu.
Što Je Novo
• Now available for WearOS - Download GnssLogger for Android smartwatches from Google Play!
• Measurements tab - See a real-time snapshot of raw measurement details, including code type, measurement state, and ADR state.
• Spoof/Jam tab - See a real-time plot of automatic gain control (AGC) and related analysis.
• RINEX log enhancements - RINEX v4.01 support, ADR/Carrier Phase is now aligned.
• Measurements tab - See a real-time snapshot of raw measurement details, including code type, measurement state, and ADR state.
• Spoof/Jam tab - See a real-time plot of automatic gain control (AGC) and related analysis.
• RINEX log enhancements - RINEX v4.01 support, ADR/Carrier Phase is now aligned.
Nedavni Komentari
Alexandru-Gabriel Romaniuc
This app is amazing, thanks a lot for developing it. But, there are still gaps into the raw measurements, it is something like it freezing after one hour, or two. After a freezing of approximately 3 hour, it starts again to measure which is very uncomfortable. (all battery optimization options are disable for this app). Thank you so much!
JohnnyJim J
Incredibly feature-rich app in an incredibly small package. VERY accurate GPS positioning, altitude and compass! I just wish my Google Pixel 9 Pro XL could use its engine for storing picture GPS location instead of the camera's built-in engine, which is extremely inaccurate (it wanders all over the place and can be off by hundreds of feet even outside)
Dziban Molniya
Edit: version 3.0.6.1 fixes the problems I had, everything works great now. Thanks for the communication, devs! Original review below: Signal strength plot doesn't seem to work at all. Yes, I've tried it outside. Status and Skyplot tabs show satellites, Map shows my location. The problem is with the Plots tab not displaying any graphs, only an empty white area, with the text "No Measurement has been received yet. Please turn on Measurement and Location in Home tab." Yes, they are both enabled.
mike dodd
App broken, was good before the option to download the data jumped from sending emails to wanting to uselessly text the large datafiles. There is no way to reset this, even uninstalling and reinstalling keeps this setting which means it is impossible to use the program for any serious testing. Even before this very serious bug getting the data out was flakey as it was easy to press wrong part of screen, loose the option to download and have to repeat the experiment. UPDATE, reset apps and fixed.
secret story
Good app! But I have a question, why is there a difference between weighted least squares solution and GPS provider? Whereas GPS system uses WLS. Maybe there are corrections (using sensors and Wi-Fi for example) but in this case, what is the difference between fused location and GPS provider? Thanks
Ross W
I am getting much better performance after the recent update. Now that it works, I am very happy with this app. It is great for GNSS analysis. My two only gripes. I can not figure out how to log sensor data. When I check Log Sensor on the main screen, nothing additional shows up in the log. And my second gripe is that the log clears everytime I go to another screen, even with the app running in the background, so I can't log data while using Google maps to navigate.
Zhiheng Cao
On Pixel 4, the app is very slow and often freezes in sensor (IMU) + RINEX logging mode. There is not problem with sensor (IMU) + raw GNSS measurement data txt format. I suspect it is because the live format conversion to RINEX is taking too much CPU on the phone? Is there a way to convert the raw txt format data from this app into RINEX on a PC or after the logging is finished?
Natnael Shewangizaw
Excellent app, thank you for the great work. The timed logging function is great, but Is there a way to adjust the data logging interval by user, say every minute or every half/hour etc.? A setting like that would be helpful.