Arduino bluetooth car plus

Análisis Y Revisión De La Aplicación Android: Arduino bluetooth car plus, Desarrollado Por Rupak Poddar. Listado En La Categoría Productividad. La Versión Actual Es 1.0, Actualizada En 04/10/2018 . Según Las Revisiones De Los Usuarios En Google Play: Arduino bluetooth car plus. Logró Más De 20 Instalaciones. Arduino bluetooth car plus Actualmente Tiene Revisiones De 2, Calificación Promedio De 5.0 Estrellas

Código Arduino-

int m1 = 12;
int m2 = 11;
int b1 = 10;
int b2 = 9;
int izquierd = 8;
int right = 7;
int up = 6;
int = 5;} int Light = 13;#}}}}}}}}}} riba}} riba. readString;

void setup () {
serial.begin (9600);
pinMode (m1, output);
pinMode (m2, salida);
pinMode (b1, output);
pinMode (b2, output);
pinMode (izquierda, salida);
pinMode (derecha, salida);
pinMode (up, output);
pinmode (inactiva, salida);
pinmode (light, light, light, light, light, light, light, light, light, luz, luz output);
}

void loop () {
while (serial.available ()) {
demora (3);
char c = serial.read ();
readstring += c;
}
if (readString.length ()> 0) {
serial.println (readString);
if (readString == ”f”)
{{##} digitalwrite (m1, high);
digitalwrite (m2, high);
}}}}} "B”)
{
digitalWrite (b1, high);
digitalWrite (b2, high);
}
if (readstring == ”l”)
{
digitalwrite (m1, high);
digitalwrite (b2, high);
}}}} if (readtring (readtring (readtring (readtring (readtring (readtring (readstring (leentring (b2, high);
}}} if (readstring (readstring (readtring (readtring (readstring (readstring (readstring (readstring (readtring (readtring (leeking == ”r”)
{
digitalwrite(m2, high);
digitalwrite(b1, high);
}
if (readstring == ”s”)
{
digitalwrite(m1, low);
digitalwrite(m2, low);
digitalwrite(b1, low);
digitalwrite(b2, low);
digitalwrite(left, low);
digitalwrite(right, low);
digitalwrite(up, low);
digitalwrite(down, low);
}
if (readstring == ”ledon”)
{
digitalwrite(light, alto); {##}}}
if (readString == "ledoff")
{
digitalwrite (light, low);
}
if (readString == "izquierda") "Correcto")
{
digitalWrite (Right, High);
}
if (readString == "up")
{
digitalwrite (up, high);
}
if (readString == "hacia abajo") alto);
}
readString = ””;
}
}

Read more