WeatherSense

एक एप्लिकेशन जो तापमान, आर्द्रता और वायु दाब पर नज़र रखता है

अनुप्रयोग की जानकारी

संस्करण :

1.8.9

वर्ग :

मौसम

अद्यतन :

June 16, 2025

इंस्टॉल :

97,974

डेवलपर :

FuZhou EMAX

Android की आवश्यकता है :

Android 5.0+

सामग्री मूल्यांकन :

Everyone

Get it on :

डाउनलोड करना APK

ऐप विवरण

एंड्रॉइड ऐप विश्लेषण और समीक्षा: WeatherSense, FuZhou EMAX द्वारा विकसित। मौसम श्रेणी में सूचीबद्ध। वर्तमान संस्करण 1.8.9 है, 16/06/2025 पर अपडेट किया गया है। Google Play पर उपयोगकर्ताओं की समीक्षा के अनुसार: WeatherSense। 98 हज़ार इंस्टॉल से अधिक हासिल किया। WeatherSense में वर्तमान में 2 हज़ार समीक्षाएं हैं, औसत रेटिंग 1.6 सितारे

उत्पाद तापमान, आर्द्रता और दबाव पूर्वानुमान सहित चार दिवसीय मौसम पूर्वानुमान सेवा प्रदान करता है। ऐतिहासिक डेटा की रीयल-टाइम अधिसूचना और चार्ट प्रदर्शन का एहसास करें।

हम वर्तमान में संस्करण 1.8.9 की पेशकश कर रहे हैं। यह हमारा नवीनतम, सबसे अनुकूलित संस्करण है। यह कई अलग -अलग उपकरणों के लिए उपयुक्त है। Google Play Store या अन्य संस्करणों से सीधे Apk मुफ्त डाउनलोड करें जिन्हें हम होस्ट कर रहे हैं। इसके अलावा, आप पंजीकरण के बिना डाउनलोड कर सकते हैं और कोई लॉगिन की आवश्यकता नहीं है।

हमारे पास बहुत सारे विकल्पों के साथ Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ... के लिए 2000+ से अधिक उपलब्ध डिवाइस हैं, आपके लिए आपके डिवाइस को फिट करने वाले गेम या सॉफ़्टवेयर का चयन करना आसान है।

यह काम आ सकता है अगर Google App Store पर आपके डिवाइस के किनारे से कोई देश प्रतिबंध या कोई प्रतिबंध है।

नया क्या है

1.fix some bugs.

Google Play Store पर दर और समीक्षा

1.6

1,557 कुल

5 1.7

4 8.7

3 5.2

2 17.6

1 66.8

रेटिंग की कुल संख्या

के लिए रेटेड सक्रिय उपयोगकर्ताओं की कुल संख्या: WeatherSense

स्थापित की कुल संख्या (*अनुमानित)

Google Play पर स्थापित कुल संख्या का अनुमान, रेटिंग की संख्या से अनुमानित और Google Play पर प्राप्त सीमाएं स्थापित करें.

हाल की टिप्पणियां

A Google user

The app would not sync with the model 1742 weather station following the instructions. Put the weather station in AP mode. Open the app and let it find your location. Then push next. Before you start the next step which is binding the weather station to your wifi. Open your wifi connection and connect to the LivingSmart wifi connection. Your phone may give you a warning that it's an unsecured connection. Connect to it anyway. Go back to the app and complete the rest of the steps in the instructions and it will sync the weather station to your wifi. Before I tried this the app would cause my phone to reboot every time I tried to sync it with my wifi. My phone is a Motorola Z2 Play running Android 8.0

Wilbur Twilliger

Works pretty well! Had no trouble connecting it to my Heyaxa Weather Station. Works well with my s22 ultra, as well as my Galaxy Tab. Following instructions had the device and monitoring in less than 10 minutes I wish it was a bit more customizable, the section with the 3 channels is blank, and I would like to remove that section on the display, as it is useless to me. Perhaps a different station would use that section, but I don't know for sure.

Robert Rosenow

The app doesn't work and the Taylor device to which it is supposed to connect is completely useless without the app. Very poor instructions and a user interface that is not at all supportive. It even got hung up when I tried to report my "issue" (the app's term) through the app. This was 45 minutes of my time I wish I had back. I only hope I can get my money back on my useless Taylor weather station.

Luke Xukem

Fails to bind a device. It can't pass through the "transfer information to the device" step. Edit: app received a number of updates now, but the problem persists. I would give negative stars rating 8g I could.

Mikael

Works OK. A few errors like wind speed is not able to be shown in m/s, which is the most common format in Europe. Also, the third sensor channel is labelled "Unsetting".

Manolis Maitos

edit: fixed! it's not a great app but at least it works now 0 Stars. Only works woth older Android versions. Completely broken and crashes instantly on my Galaxy S24 Ultra

Peter Turner

I recently purchased an Altronic WiFi Home Weather Station X7063 that requires this App for some functions. I have had no success linking up my Wi-Fi at all. I go through the binding process and the AP (Acessd Point?) stops flashing and goes soild. The message on my phone says connection successful! Press Wi-Fi App mode button on backside of weather to start. Now I'm assuming this means to hold down Wi-Fi button on side of display unit, so I do that for 3 seconds when it goes to main screen but no NETWORK displayed inside of FORECAST "box" top left hand side of main display. A small WIFI display flashes in the box but there is no signal level indicated. I have swithched off Norton 360 Wi-Fi settings etc. and I have the unit just about sitting on top of WiFi modem router.to link up. I purchased unit after last App upgrade in December 2020 due to bugs.I have exchanged unit and still same fault. I have a Pixel 5 running Android 11. I'm sure I have followed all installation instructions and the only problem left must be App. Very disappointed.

Marco Dhaene

At first glance it seems to work ok, but... the synchronisation of the outdoor unit is always a day late which is pretty useless and since a week or so I keep getting warnings that the temperature is 45 or more degrees celsius... what? Where? Both the indoor and outdoor unit don't even get near that temp. It's like 20 degrees at most. That's really annoying. And even worse, the warnings are both recent and old, but I still get tons of them. I can turn off the warning by disabling notifcations, but that kind of misses the point than, right? A shame because it really has potential and the data is there, it's just that it isn't being put to use in the correct way... because it sort of workd ok before and I like the look of the app it's 2 stars, but it's more 1 to 1.5 stars to be honest.