PIXPRO Remote Viewer
또한, APP를 통해 빠른 업로드를 카메라를 작동하고 이미지를 공유 할 수 있습니다.
앱 정보
Advertisement
앱 설명
Android 앱 분석 및 검토 : PIXPRO Remote Viewer, JK Imaging Ltd.에서 개발했습니다. 도구 카테고리에 나열되어 있습니다. 현재 버전은 2.6.17이며 29/04/2025 에 업데이트되었습니다. Google Play : PIXPRO Remote Viewer에서 사용자 리뷰에 따르면. 204 천 이상의 설치를 달성했습니다. PIXPRO Remote Viewer는 현재 1 천 리뷰, 평균 등급 1.8 스타를 보유하고 있습니다
이 응용 프로그램은 KODAK PIXPRO 무선 촬영 장치를 지원합니다."PIXPRO 원격 뷰어"응용 프로그램을 무선으로이 프로그램과 호환되는 무선 촬영 장치와 안드로이드 장치를 연결하고, 무선 운영 촬영 장치를 통해 사진을 촬영하고 기록을 즐길 수있는 안드로이드 장치를 조작 할 수 있습니다. 한편,도 관련 매개 변수를 설정할 수 있습니다 심지어 위치 정보는 안드로이드 장치의 GPS에 의해 사진에 기록합니다.
게다가, 당신은, "PIXPRO 원격 뷰어"응용 프로그램을 통해 무선 촬영 장치에 멋진 이미지를 검색 안드로이드 장치에 다운로드 한 후, 친구 및 가족과 공유하는 소셜 네트워크로 보낼 수 있습니다. 독특한 기능 - 이미지 편집은 당신에게 뜻밖의 놀라움을 가져올 수있다.
우리는 현재 버전 2.6.17를 제공하고 있습니다. 이것은 우리의 최신 버전입니다. 다양한 장치에 적합합니다. Google Play 스토어 또는 우리가 호스팅하는 기타 버전에서 직접 Apk를 무료로 다운로드하십시오. 또한 등록없이 다운로드 할 수 있으며 로그인이 필요하지 않습니다.
옵션이 많은 Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ... 용 2000+ 이상의 장치가 있으며 장치에 맞는 게임이나 소프트웨어를 쉽게 선택할 수 있습니다.
Google App Store의 국가 제한이나 장치 측면에서 제한 사항이 있으면 유용 할 수 있습니다.
최근 의견
Wesley Cole
App Always quits working, slow to load but not sure if it's just my phone or connection itsel. But Always "close app" or "wait" comes across my screen multiple times trying to just load the app. But once it does actually load and finally works it's great. I love how i can easily download my photos off my camera to my phone and take pictures on My camera with my Phone! Super easy to use, just sometimes i can't get my pictures to load on to my phone. I have to keep closing out and reopen the app.
CNH 320
I just bought the WPZ2 a few days ago. I was excited to learn how to use it. I saw it was wifi enabled and that I could transfer pictures to my phone. First, I hate that an app is required to do this in the first place. The app won't connect no matter what I do. I thought it was my fault but it did actually connect for half a second just to disconnect. After struggling and reading other reviews with the same problem and trying their suggestions to no avail. I'm returning this camera.
daniel bordelon
So far has downloaded everything fine however under manual mode I tried it last night it was fine, today I went out to stargaze with it and had weird lines going across my screen. I had to switch back to the camera itself and it was fine on there just the app, I didn't try resetting it to see if that fixes it, but still sucks cause Id like to use my phone when possible as a intervalometor so my shaky hands don't mess up the beautiful stars. So far great camera and app besides those issues.
Gergely Klusóczki
I just wanted to say this app works! I think most of the bad reviews come from user error. I use this app with a kodak wpz2 and it syncs every single time. Setting up wasn't the most intuitive, you have to go to wireless mode on the camera, but it's also not rocket science. Once connected I can download photos to my phone in seconds. The app is responsive and offers live view of the camera, with changeable settings, and is able to take photos while connected.
Jake S
It worked once, but has never worked again after that. Connecting to the camera's wifi and opening the app shows a 'No photos and videos' message even though there are photos on the camera. The icon to operate the camera remotely does nothing. This isn't fixed by a camera factory reset, an app storage wipe, an app reinstall, a phone reset, changing the wifi name or password, or formatting the SD card. Wifi access to the camera is completely unusable after the first use.
Sean Cruz
It always takes a while to open. Recently, I've been getting notices that the app has a bug so I need to restart the app a few times. Additionally, when I download the pictures to my phone, it also does not register the photos' actual date and time taken anymore, although it used to do that. Hoping these issues get fixed soon....
George A
It works but.... The biggest problem was getting it to connect to my moto g power smart phone. It would say it was connected but I couldn't do anything. After much searching online unsuccessfully, I figured it out myself. I had to go into advanced settings on my phone's Wi-Fi connection to the camera and tell it to use the camera's MAC address not a random MAC address. Also change phone wifi connection to "stay connected". Finally, app is not user-friendly, download the app manual from Kodak.
Ben
took a lot of fiddling to finally get everything to play together nicely. works just fine now, very frustrating start. i'll try to give the best instructions I can because they are non-existent in any official form. apologies in advance, play store deleted all my formatting and crammed this all into one long paragraph. 1::: start by naming your camera something recognizable. to rename your device. all button names are according to the user manual: press the menu button (very bottom left), scroll all the way to the bottom where it shows the menu symbol and says "press set to enter". press set. 2::: scroll to the bottom to the wifi symbol. "DSC Device" should be highlighted in red, press set and type in an easy to remember name. this will be the name of the wifi network you need to connect your phone to. be sure to press save. 3::: press the mode button, scroll to and press select on wifi mode (between underwater and auto mode). select AP mode. the camera is now setup and ready, don't press anymore buttons on the camera the rest of the steps are on your phone. 4::: don't open the pixpro app yet. if it's open already make sure to close it completely (swipe up for a list of running apps, and swipe up on the pixpro window). 5::: navigate to your wifi settings menu. on my pixel 3a i can just swipe down from the top and long press the wifi symbol. other phones you might need to scroll through your app tray for 'settings' and find wifi options within 'network & internet'. disconnect from any current wifi connections. 6::: scroll through your list of available wifi connections until you see the name of your camera entered previously, and select that. if you get a pop up saying "this connection does not have internet access, disconnect?" check the box 'don't tell me again' and hit 'ignore. 7:::' open the pixpro app. you should hopefully see a black screen with an orange loading wheel, and after a few seconds you should see buttons similar to your default camera app, but with the view coming from the camera instead of your phones camera. it should work ok from here. i've used it for about an hour and no other issues yet once it's setup properly. 8:::: few extra troubleshooting tips: it appears to not work if you deny access to location information, giving just a blank orange screen that will not connect to the camera. however you do not need to have location turned on on your phone to get the app to function. I suggest setting location data permission to "only while the app is running", and turning location data off completely while using the app if, like me, you don't want to give apps data they don't need. ::::for any developer that might (doubtful) actually read this: don't force location data. give error reports so users know what's wrong, a blank orange screen is so incredibly unhelpful. put instructions IN the app, showing where to go within the camera. super confusing that selecting wifi settings isn't under wifi settings, but under wifi mode. they should both lead to the same place and functionality. with future cameras, please just use bluetooth tethering and put in a dedicated bluetooth button for no-nonsense pairing. once it works this app is great, all the features of the camera controllable from my phone. easy and quick downloading images. no major redesigns need to happen, it just desperately needs some bug-fixing and clear instructions.