pecron
pecron APP은 pecron 휴대용 발전소를 사용하기 위한 IoT 어플리케이션입니다.
앱 정보
Advertisement
앱 설명
Android 앱 분석 및 검토 : pecron, Pecron에서 개발했습니다. 도구 카테고리에 나열되어 있습니다. 현재 버전은 V1.8.1이며 09/05/2025 에 업데이트되었습니다. Google Play : pecron에서 사용자 리뷰에 따르면. 4 천 이상의 설치를 달성했습니다. pecron는 현재 44 리뷰, 평균 등급 1.8 스타를 보유하고 있습니다
개요: 페크론 이동식 발전소의 전력량, 사용시간, 전력량 등을 APP을 통해 모니터링 할 수 있습니다.연결 방법: WIFI를 통해 클라우드에 연결하여 원격 모니터링 및 제어를 실현할 수 있으며 Bluetooth를 통해 연결하여 모니터링 및 제어를 실현할 수도 있습니다.
우리는 현재 버전 V1.8.1를 제공하고 있습니다. 이것은 우리의 최신 버전입니다. 다양한 장치에 적합합니다. Google Play 스토어 또는 우리가 호스팅하는 기타 버전에서 직접 Apk를 무료로 다운로드하십시오. 또한 등록없이 다운로드 할 수 있으며 로그인이 필요하지 않습니다.
옵션이 많은 Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ... 용 2000+ 이상의 장치가 있으며 장치에 맞는 게임이나 소프트웨어를 쉽게 선택할 수 있습니다.
Google App Store의 국가 제한이나 장치 측면에서 제한 사항이 있으면 유용 할 수 있습니다.
새로운 것
Optimized some known bugs
최근 의견
Matthew Bancroft
New update made the app look a tad bit better. The ability for the app to connect, and stay connected, to anything running is still abysmal and arguably even worse with the update in March 2025. If that bug gets fixed, then this is 4 stars. Without the fix, it is borderline useless.
Sven Kelling
See update below: The app needs significant improvement in maintaining a stable Wi-Fi connection and automatically reconnecting when Wi-Fi is lost. Without this functionality, the app is not practical for many users. I have the 3600 set up remotely and rely on it for monitoring when I'm away. Update: After switching to a Google WiFi System Router Replacement for Whole Home Coverage, my connection has been stable!
Damien Taylor
As others have mentioned, you can't fully connect unless nearby. When far away, I found that It does display correct info, it's just behind an unavoidable "connection unsuccessful" warning. After closing the warning it returns you to the home screen, giving you about 1 second to see the device status. What I need is a trigger for DC input threshold. Eg: turn on AC inverter when DC is over 500 watts coming in turn off when under 100 watts.
Dave in AZ
Very poor app. Constantly tries to force me to "log in" when I'm camping, or it won't let me access the app to control powerstation. Connectivity is very spotty, it often will not discover the e1500LFP and I have to "add device". It just never works seamlessly. When you update settings in the app, then leave the screen, the settings have not changed when you go back to that screen. But there is a 50% chance they actually HAVE changed on the device, and 20 min later if you check, they show.
Aloha Jeff
App updated October 1, 2024. Still terrible. After finally getting connected via WiFi (not easy) I am able to connect to the E1500LFP. Unfortunately the app displays the battery at 100% even when it's not. Front screen on E1500LPG shows 70% and 600w draw. App shows 100% battery and no draw. The worst app experience of any product I own. Can't you "copy" the Anker app? At least it works!
Jaron West
It's bad: The range is bad so anyone able to add the device but it seems usually offline, bring it closer to router. It only runs on 2.4GHz which is pretty IoT standard. I only once got AC/DC status and otherwise it just shows DC on AC off. Voltage and Hz reading will tell you the truth for AC status. Battery status is reliable. Changing voltage and Hz from app always seems to fail so I guess I'm glad it is already correct. They should just release code and let home assistant community dev it.
Simon Waddington
If I had known this app was so basic, hard to understand, contains untranslated Chinese menu options, and Chinese character restrictions I would not have bought the device. I hope they improve it soon as it is a major negative.
railgun
Took way too long to set up an account. Apparently it's a separate account from the Pecron website. Why? The app also refuses to pair with the power station. Nothing shows up in the app even when it's in pairing mode.