VictronConnect
실시간 상태 정보를 얻고 블루투스 또는 USB를 통해 Victron 제품 구성
앱 정보
Advertisement
앱 설명
Android 앱 분석 및 검토 : VictronConnect, Victron Energy BV에서 개발했습니다. 도구 카테고리에 나열되어 있습니다. 현재 버전은 6.17이며 29/04/2025 에 업데이트되었습니다. Google Play : VictronConnect에서 사용자 리뷰에 따르면. 2 백만 이상의 설치를 달성했습니다. VictronConnect는 현재 4 천 리뷰, 평균 등급 3.7 스타를 보유하고 있습니다
VictronConnect는 실시간 상태 정보를 얻을하고 VE.Direct 블루투스 스마트 동글 또는 USB 인터페이스에 VE.Direct *를 사용하여 Victron 제품을 구성 할 수 있습니다.라이브 DATA :
태양 광 충전기 나 배터리 모니터에서 즉각적인 데이터를 가져옵니다.
역사 기록을 읽어 ** :
쉽게 설치를 진단 할 수 있습니다.
BlueSolar MPPT 충전기를 사용하면 한 눈에 삼십일 기록 레코드를 얻을 수 있습니다.
펌웨어 업데이트 :
항상 최신합니다. VictronConnect는 오래된 펌웨어를 업데이트하라는 메시지가 표시됩니다 감지 최신 펌웨어 버전이 포함되어 있습니다. 수동으로 펌웨어를 업데이트 할 수있다.
DEMO MODE :
내장 된 데모 도서관에서 제품을 선택하고 모든 기능을 발견 할 수 있습니다.
지원 Victron 제품 :
* BMV 70X 배터리 모니터
* BlueSolar 및 SmartSolar MPPT 충전기 ***
* VE.Direct 피닉스 인버터
* 블루 스마트 IP22 충전기
* 블루 스마트 IP65 충전기
* 블루 스마트 IP67 충전기
* 피크 파워 팩
----
* 전화 나 태블릿 여기서 시험 장치 목록, USB OTG의 지원을 확인한다 : http://www.victronenergy.com/live/victronconnect:start
** 만 기록을 지원하는 제품에
*** BlueSolar 15분의 70 지원되지
우리는 현재 버전 6.17를 제공하고 있습니다. 이것은 우리의 최신 버전입니다. 다양한 장치에 적합합니다. Google Play 스토어 또는 우리가 호스팅하는 기타 버전에서 직접 Apk를 무료로 다운로드하십시오. 또한 등록없이 다운로드 할 수 있으며 로그인이 필요하지 않습니다.
옵션이 많은 Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ... 용 2000+ 이상의 장치가 있으며 장치에 맞는 게임이나 소프트웨어를 쉽게 선택할 수 있습니다.
Google App Store의 국가 제한이나 장치 측면에서 제한 사항이 있으면 유용 할 수 있습니다.
새로운 것
- Fix custom name not updating in the product list on some Android versions
OrionXS 1400:
- Fix Orion XS Smart Alternator(24V) preset
- Add firmware v1.11:
- Internal improvements
OrionXS 1400:
- Fix Orion XS Smart Alternator(24V) preset
- Add firmware v1.11:
- Internal improvements
최근 의견
R. Tyson Vance
Low voltage on load output DOES NOT disconnect power on user algorithm. I have tested a low setting of anywhere from 11.75 to 12.5. The disconnect only happens at 12. If the setting is set below 12, it does not disconnect at all. Street light is off. Most of the testing was across multiple days so the known issue of having to wait 5 minutes does not apply.
Rose Green
Update: I had to find the PUK # on the side of the unit and reset the PIN/pairing code. Now both phones work with it! I loved this app until my phone locked me out and I could not use it to connect. I bought a new phone but am unable to pair with the bluetooth. My old phone is not operational, and has been factory reset. I can no longer use it or the new phone to pair. Any ideas?
A Google user
I have been using this app with the 100/20 MPPT Victron controller at a remote cabin in the mountains of the Pacific NW in the US. The controller has worked well so far but I have two issues with the app. Our cabin is well beyond both internet and cell services and we can only visit occasionally. Several times now, when I have been away for a while, this app refuses to connect without first updating firmware but, without internet access, the only way to do this is to disconnect the controller entirely from the system and take to where there is internet access, temporarily connect the unit to and 12vdc power source and complete the update. Perhaps This is ridiculously cumbersome. I can't be the only user in this situation. It should be possible pre-download the latest firmware where there is internet access and then complete the install at the remote location. It should also be possible to continue using the system with the outdated firmware. The way it is now, I arrive at the remote location not knowing if I'll be able to access the Victron unit or not. It would also be very helpful to save data to the smartphone to retain more than 30 of Information.
A Google user
I am a victron fanboy. Nothing but the highest quality. They fixed an earlier issue in about a week. I use the dynamic cutoff in the inverter to turn off the inverter at night and on during the day. sometimes I want to use the AC at night, but I have to turn off the dynamic cut off and lower the sensitivity voltage. I wish there was a way to temporarily disable low voltage shutdown without changing all the specific settings.
Kevin Wheeler
Would like to use the app to monitor for low battery condition and send an email. Adding this functionality would be nice. Short of that, could you at least have an option to have the app generate an actual system notification instead of just a pop up message? That way a task monitor could add an automatic task to send an email. Thanks.
R. Louis T.
Good app, we've been using it for a couple of weeks with a SmartSolar MPPT 150/35 controller. No problems so far. Decent functionality and a polished UI. Yes it does disconnect the bluetooth connection every time the app loses focus, but it reconnects when it needs to. Nice monitoring and configuration features.
Dave Brandow
Unable to connect to the Samsung note 20 ultra. Phone finds the battery monitor but when I add the password for Bluetooth it gets to 80% and asks for the password again. As recommended in your troubleshooting guide I turned on location and power cycled both the phone and battery monitor model BMV-712. I checked to see if it was paired and it is not,, it is listed in Bluetooth devices. I'm able to connect with my iPad.
Tes Tos
Frequent disconnects, with different devices distance is less than 15ft so it should not be disconnecting, using latest version and firmware. Using 2 Samsung TAB E, one has OS 4.4 and the other 7.2, also 7" Onn tablet OS is 9.0 these tablets work fine with other apps, 35/150 Victron MPPT controller, with BT adapter, there is one wall in between the tablets and the solar generator, I just upgraded the firmware since it said the version I had (working) would not work any longer and did not gave me any options beside upgrade. It will disconnect several times a day, no crashing just stops working and I have to reset the BT on the tablets and re-launch app several times to connect again, no other app running in the background. I have paired and unpaired several times with same results.The same happened a few versions ago had to use older version of the software and it improved somewhat.