Konnected
Konnected Alarm Panel 및 기타 Konnected 장치를 설정하고 구성하십시오.
앱 정보
Advertisement
앱 설명
Android 앱 분석 및 검토 : Konnected, Konnected, Inc.에서 개발했습니다. 부동산/홈 인테리어 카테고리에 나열되어 있습니다. 현재 버전은 1.6.5이며 28/01/2025 에 업데이트되었습니다. Google Play : Konnected에서 사용자 리뷰에 따르면. 17 천 이상의 설치를 달성했습니다. Konnected는 현재 52 리뷰, 평균 등급 3.0 스타를 보유하고 있습니다
Konnected Alarm Panel은 기존의 사전 배선 된 홈 보안 시스템과 SmartThings, Home Assistant, Hubitat 및 OpenHAB를 포함한 인기있는 홈 오토메이션 플랫폼을 통합하여 유선 알람 시스템을 활성화합니다.이 앱은 Konnected 장치의 설정, 검색, 구성, 디버깅 및 업데이트를 지원합니다.
우리는 현재 버전 1.6.5를 제공하고 있습니다. 이것은 우리의 최신 버전입니다. 다양한 장치에 적합합니다. Google Play 스토어 또는 우리가 호스팅하는 기타 버전에서 직접 Apk를 무료로 다운로드하십시오. 또한 등록없이 다운로드 할 수 있으며 로그인이 필요하지 않습니다.
옵션이 많은 Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ... 용 2000+ 이상의 장치가 있으며 장치에 맞는 게임이나 소프트웨어를 쉽게 선택할 수 있습니다.
Google App Store의 국가 제한이나 장치 측면에서 제한 사항이 있으면 유용 할 수 있습니다.
새로운 것
Enables discovery and configuration for GDO blaQ and GDO White with experimental Matter firmware.
Adds UI to calibrate the optical sensor on the GDO White.
Adds Alarm Panel Interface feature for configuring settings to interface Konnected with a traditional alarm system.
Adds UI to calibrate the optical sensor on the GDO White.
Adds Alarm Panel Interface feature for configuring settings to interface Konnected with a traditional alarm system.
최근 의견
Otis Mason
So people with can't find device issue. The fix is this. 1st go to your app manager and force stop the application. Then clear data. Once cleared you can reload the app and add the device by ip and port manually. The scan function does not work and untill you clear data you can't manually add it... hope it helps. Spent 3hrs with old version to find same issue.
Michael Hoke
App simply doesn't work. I'm using a Samsung S20 FE. The app is stuck on the "My Devices" page - menu selections have absolutely no effect. It looks like there is some round blue selection button just off the bottom of the screen (I can just see the top) but the app does not allow zooming out. I got it to find one of my two panels but the check mark is blued out and I can't select anything, much less rename it or do anything else. Note: works great on iPhone. 0 🌟 Android/5 🌟 iPhone.
Faulty Thinking
Bare Bones application that gets the job done. The starting screen can be a bit misleading because you would think scan is for new devices but that's for existing devices. You really want to connect it to the konnectedcloud to do anything with your devices. Follow the instructions and a little DIY spirit will get you through.
Torben Pedersen
Worked great on first install on Galaxy Note 10! Was able to get it connected to the wifi network (powered with 12v power supply) and it prompted with software and firmware updates. Both succeeded install in that order (sw, fw). Home Assistant discovered it immediately and was able to get it configured.
Jack Harrison
I'm on a Pixel 3 XL and I can't get past my devices page. I was able to get to find my device but it doesn't save it and the moment I leave the app I have to redo everything. And when I finally find the device I cant click on it. I notice several others having this issue too. I want to leave a good review but can't due to the issues.
Chuck Andraka
Does not appear to work with fixed IP addresses (Discovery off). This is a recommended setup to save bandwidth and memory on the Konnected cards, but the app cannot apparently handle this setup. Will have to flash the devices with USB cable and laptop
James
I was able to see my device through the app but then nothing useful works. Can't see sensor status or any io information from the various pins. That would be useful. This is junk. Make the firmware for the device open source btw.
Lee Dust
Doesn't work. Just closes when I tap the "SCAN NOW" button. 3/21/2021 - Tried it again to get my port number so I can integrate it into Home Assistant from fresh install on a new system. Still crashes.