
Niko Home
Thiết lập và kiểm soát cài đặt Niko Home Control theo cách thân thiện với người dùng
Thông Tin Ứng Dụng
Advertisement
Mô Tả Ứng Dụng
Phân Tích Và Đánh Giá Ứng Dụng Android: Niko Home, Được Phát Triển Bởi Niko nv. Được Liệt Kê Trong Danh Mục Lối Sống. Phiên Bản Hiện Tại Là 2.22.4.26219+0.2+304592+35dd788, Được Cập Nhật Vào Ngày 05/03/2025 . Theo Đánh Giá Của Người Dùng Trên Google Play: Niko Home. Đạt Được Hơn 48 Ngàn Cài Đặt. Niko Home Hiện Có Đánh Giá 173, Xếp Hạng Trung Bình 3.1 Sao
Ứng dụng này cho phép bạn tạo một hệ thống điều khiển trung tâm và dễ sử dụng trên điện thoại thông minh hoặc máy tính bảng của mình. Giao diện thân thiện với người dùng cho phép bạn truy cập vào tất cả các chức năng của cài đặt Niko Home Control, chẳng hạn như chiếu sáng, cửa chớp cuộn xuống và thông gió.Tôi cần những gì?
Cài đặt Niko Home Control của bạn cần chứa một trung tâm thông minh không dây (552-00001) hoặc bộ điều khiển được kết nối (550-00003) và phải được kết nối với internet. Việc cài đặt cần chạy phần mềm lập trình Niko Home Control II 2.5.1 (hoặc mới hơn). Nếu cài đặt của bạn có chứa bộ điều khiển (550-00001) hoặc được lập trình với phiên bản cũ hơn của phần mềm lập trình Niko Home Control, vui lòng sử dụng phiên bản trước của ứng dụng Niko Home Control.
Đặc trưng:
• Điều khiển từ mọi nơi trên thế giới nếu cài đặt được đăng ký trên http://mynikohomecontrol.niko.eu.
• Thêm các điều khiển ưa thích của bạn vào màn hình Mục ưa thích.
• Nhận thông báo được cấu hình sẵn từ quá trình cài đặt của bạn.
• Kiểm soát truy cập không được hỗ trợ cho iPhone 7 trở lên. Nếu bạn muốn tiếp tục sử dụng kiểm soát truy cập, hãy liên hệ với dịch vụ khách hàng của Niko để kích hoạt lại nó trong ứng dụng Niko Home Control II.
yêu thích
Chọn các điều khiển yêu thích của bạn từ danh sách đầy đủ các điều khiển để dễ dàng truy cập chúng.
Điều khiển
Tất cả các điều khiển được liệt kê cho mỗi phòng. Điều khiển từ xa đèn (giảm độ sáng), hệ thống thông gió, cửa chớp cuộn xuống hoặc rèm che nắng của bạn. Phản hồi tức thì.
Cài đặt
• Thiết lập và định cấu hình cài đặt Niko Home Control của bạn trên hệ thống dây truyền thống
• Kiểm tra trạng thái cài đặt và/hoặc kết nối
• Xem thông tin hỗ trợ.
thông báo
Nhận thông báo được cấu hình sẵn từ cài đặt Niko Home Control của bạn. Nhận thông tin về những gì đang xảy ra ở nhà: phát hiện chuyển động, trẻ em đi học về.
Bằng cách tải xuống ứng dụng này cho Niko Home Control, bạn chấp nhận các điều khoản và điều kiện của ứng dụng mà bạn có thể tìm thấy trên www.niko.eu, “Pháp lý & quyền riêng tư”.
Chúng Tôi Hiện Đang Cung Cấp Phiên Bản 2.22.4.26219+0.2+304592+35dd788. Đây Là Phiên Bản Mới Nhất, Được Tối Ưu Hóa Nhất Của Chúng Tôi. Nó Phù Hợp Cho Nhiều Thiết Bị Khác Nhau. Tải Xuống Miễn Phí Apk Trực Tiếp Từ Cửa Hàng Google Play Hoặc Các Phiên Bản Khác Mà Chúng Tôi Lưu Trữ. Hơn Nữa, Bạn Có Thể Tải Xuống Mà Không Cần Đăng Ký Và Không Cần Đăng Nhập.
Chúng Tôi Có Nhiều Thiết Bị Có Sẵn 2000+ Cho Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ... Với Rất Nhiều Tùy Chọn, Bạn Dễ Dàng Chọn Các Trò Chơi Hoặc Phần Mềm Phù Hợp Với Thiết Bị Của Bạn.
Nó Có Thể Có Ích Nếu Có Bất Kỳ Hạn Chế Quốc Gia Hoặc Bất Kỳ Hạn Chế Nào Từ Phía Thiết Bị Của Bạn Trên Google App Store.
Những Gì Mới
• General bug fixing
Nhận Xét Gần Đây
Vik Van Os
It works, yes. But it could be made to work much better, and more importantly, faster! Because it has to connect over the Internet all the way to Belgium, st-niklaas. Just to dim the lights. A local server on my lan would solve a lot of latency issues. And why do I need to be connected to the Internet just to be able to switch my lights on or off....
Tom Goethals
I whish there was a way to hide buttons, i'm forced to create 2 basic actions to control the same light from 2 buttons (dimming with one button and a regular dim control) and I hate there is now essentially 2 lights showing in the app that really is only light. also whish there was a forum to ask questions for a non-proffesional customer. (DIY) don't get why i can't just output the status of a sensor in the app without needing a physical light or something connected to it. Yes you can send a notification but i just want to set an icon when a certain sensor has a certain value.
Marcel Pilgaard Havemann
Temperature adjustment needs to be updated. Keys are unresponsive and requires multiple touches to be adjusted. In general more customization needed for system. Routines, conditions and time schedules should also appear in app and not only in programming software. Current values should also be visible in the APP from devices such as mini PIR, analog sensors etc. This would be very helpful while tuning the system where a specific value needs to activate a certain event.
Nicholas Filer
Feb 2021. When it works it is almost good. It is slow to load and you have to be patient. Once loaded, it seems to work reasonably when it works. But mine keeps on losing access to my Digital Black! The guide suggests how to fix this but mostly it doesn't work for me! Mine simple fails to access the device setup page at all. The Device selection simply does nothing after a fraction of a second's thought. This means the digital black is rendered a useless device. Currently it also seems to NOT work with Sky Q satellite TV. I can have either Sky or no digital black. My installer did a complete factory reset and got it working temporarily until we switched on just the main Sky box. It then broke within a few minutes again. The digital black seems to see each Sky device as a separate modem on the same WiFi SSID and presumably picks the first one to respond and then cannot connect to the router which is slower responding? I'm not even using WiFi for Sky as I have Ethernet cables - but the Niko Home App and Digital Black, it seems, is still confused! So I'm in desperate need of technical support or help. But Niko will only talk to Professional Installers - NOT to customers, No obvious way to contact them to ask about software/hardware upgrades. I'm very unhappy about the large waste of time and money this is costing me!!!!!!!!! My installer is trying to help. But this is not obviously something wrong with their work, just the product! Please Niko - get in touch with me. Help me and you resolve what seems to be a horrible software fault.
Joeri (Jinks)
Snapshot feature is nice but you can't see the full recording ? Also you can't add full groups to favorites anymore. Like a button 'living' so you can go directly to all the living switches, you need to go to controle tab show all click your group then you have access to them. Way to many clicks instead you should be able to add them to your favorites. Otherwise great upgrade.
Geoffrey Jouret
A lot more stable for Video calls from the video unit. until now I received every call, unlike with the niko home control 2 app. The app keeps you logged in and works every time you open it, The interface could be optimized to keep everything organized/handy to reach.
Costanza Asnaghi
I do like the new version of the app. But I keep receiving ghost calls in the middle of the night, and that is far than amusing. And I can't complain to anyone about this! The fact that Niko only talks to the installers and not to the end users is super ridiculous.
Criss Wullaert
Was advised to use this app instead of the yellow one. I haven't experienced any of the issues I had there. Great work by Niko to provide an easy way to control all the cool functions