Legacy View
信息和控制您的钱德勒系统水处理系统
应用信息
Advertisement
应用描述
Android应用分析和审查：Legacy View，由Chandler Systems开发。在生活时尚类别中列出。当前版本为6.13.1，在 29/05/2025 上更新。根据用户在Google Play上的评论：Legacy View。超过40 千的安装。 Legacy View目前有912评论，平均评分为4.6星
Legacy View使设置和监控Chandler Systems水处理系统比以往更加轻松！此应用程序涵盖使用传统视图阀的Chandler Systems的三个品牌（CSI，Clearion和WaterSoft）出售的系统。与旧版View Valve一起使用时，用户可以通过该应用执行以下功能：-连接到系统中的所有Legacy View阀。
-方便地查看您的阀门状态。
-轻松查看和更改阀门设置。
-查看当前用水量信息。
-以图形方式查看和导出用水量信息。
-从手机或平板电脑开始再生或反冲洗循环。
-设置，查看，导入和导出维修水处理经销商信息。
-更好地了解系统的工作方式并了解其设置。
-更新蓝牙LE阀上的固件。
权限：
-访问蓝牙设置，与蓝牙设备配对：此应用使用您的设备的蓝牙无线电与Legacy View阀门进行通信。
-大概位置（基于网络）：这是Android操作系统要求应用程序扫描Android Marshmallow +上的蓝牙设备。
-写入外部存储：这是管理阀门固件，导出图形数据和导入/导出经销商信息的要求。我们不会修改或查看“ / Documents / Water System”目录之外的任何内容，我们只会将提及的数据导出到该目录中。
-读取外部存储：这是从写入外部存储权限继承的。我们不会从外部存储读取任何内容。
故障排除：
一些用户会遇到困难，因为他们的阀门没有显示在设备列表中。发生这种情况时，请尝试以下操作。
1.确保阀门的蓝牙功能已打开。按住两个按钮5秒钟，进入阀门的高级菜单，直到屏幕开始闪烁。然后反复按菜单/进入按钮，直到看到“ bE 0”或“ bE 1”。如果它是“ bE 0”，则关闭蓝牙，按“设置/更改”按钮将其启用，将设置更改为“ bE 1”。然后反复按菜单/进入按钮，直到一天中的某个时间回来。如果您的阀门无法固定并保持在“ bE 1”，请与我们联系，您的电路板可能需要更换。
2.拔下阀门的插头，并卸下9V电池（如果已安装）。等待30秒钟，然后重新打开阀门电源。
3.关闭手机上的蓝牙，然后再打开。
4.重新启动手机。
5.确保已启用“旧版视图”应用程序的位置权限。 Google必须获得位置许可才能使用Bluetooth LE扫描仪。我们不需要或访问您的位置，但是因为可以使用蓝牙来确定您的位置，所以我们必须具有位置权限才能进行阀门扫描。
一旦可以连接到阀门，如果应用提示您进行固件更新，请确保您允许阀门更新固件。
我们目前正在提供6.13.1版本。这是我们最新，最优化的版本。它适用于许多不同的设备。从Google Play商店或我们托管的其他版本中免费下载Apk。此外，您可以在不注册的情况下下载且无需登录。
我们拥有超过2000+的Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ...设备，并提供了许多选项，您可以轻松选择适合您设备的游戏或软件。
如果在Google App Store上有任何国家限制或设备侧面的任何限制，它可能会派上用场。
什么是新的
* New C6.13 firmware
* Bug fixes
* Bug fixes
在Google Play商店进行评分和审查
总收视率
评分为活跃用户的总数: Legacy View安装总数（*估计）
估计Google Play上安装总数, 近似于评级数和在Google Play上达到的安装界限.
Discover Apps
- Bible for Women: Daily Verses
- Golden Surveys - Make Money
- Smart Light Smart Home Control
- Nomi: AI Companion with a Soul
- SeaArt: AI 艺术生成器
- Us: The AI Relationship Coach
- Xego: Character AI Chat
- Auren - An Ally That Gets You
- MECH AI: Diagnostic & Repair
- Pet Parent – All in One
- Richy Dollars: Tap & Earn
- All For Christ Ministry
最近的评论
Hillary Holbrook
When you go to advanced settings you can't get anything to load on the page. So I click dealer info. - won't load, settings again - wont load, device list & go back in and it still won't load. Then I disconnect Bluetooth, reconnect & still won't load. Then after standing there for 15 minutes and keeping my thumb on the screen so it won't time out all of sudden I can see the resin grain capacity, override days etc. but I can't see any of the other information below. SUPER EFFECTIVE. Ridiculous.
Derek Shearin
The app overall works, but it would be much better if you could access the app info without being connected to the units. If I walk into a store to purchase salt, I cannot check how much is currently in the tank. it seems it should download the current (most recent) data to the phone. I can't see how much water I've used or anything.
John Hildenbrand
The latest revision works great! All the important data points are there to see, and changing frequency of backwash is super easy.
Abraham Sterbenz
Had trouble with app viewing filter valve head. It didn't show on the device list. In short, I unplugged the power supply from the outlet, unplugged the 9v battery in the front tray, waited 30 seconds, plugged the 9v battery back in, and finally plugged the power cord back in. Effectively, a hard reboot. Worked like a charm.
Sherri King
I am having trouble getting my Android to get the Metered Softener to install in the app. It installed the Aeration Filter just fine. We made sure Bluetooth was on in the valve, said bE1. We unplugged from the wall socket and took the 9 volt battery out, waited and reinserted and plugged back in. I restarted the phone, made sure Bluetooth enabled on phone, permission is allowed, location turned on. Anything else I'm missing?
Randy Wheeler
I install these products in rural areas where there is often no cell service or internet. The new requirement for "fine location permission" prevents me from using the app on my phone to access these units in these locations. The units work great! If I grant the app permission where I do have service, will it let me connect to the bluetooth where I don't have cell service?
Lorene Spencer
The app will no longer connect to our system and hasn't for a couple of weeks. The aeration filter shows up when I press the app, but when I push it to connect, it won't connect. The system does have bluetooth turned on and so does my Android phone. I have an Android 8 phone. I have tried all of the steps in the instructions, but it still won't connect. The only one I couldn't find to do is checking if permissions for Google has been given in the Legacy View app. How do I do that?
Jason Loo
Ok.. I got the 9/1 update today (still on same note 9).... To my surprise, the water flow data is now working..... At the moment. The app looks to be working well.... I appreciate your efforts and persistence in getting this to function as it is key to making sure the system is managed properly... ill update after running some test.... but looks promising at the moment.... also note, I had to delete my last post to put this one... as there was no more room for characters.. thank you