Konnected

設置和配置Konnected Alarm Panel和其他Konnected設備。

應用信息

版本 :

1.6.5

類別 :

房屋與房產

更新 :

January 28, 2025

安裝 :

17,401

開發人員 :

Konnected, Inc.

需要Android :

Android 4.4+

內容等級 :

Everyone

Get it on :

下載 APK

應用描述

Android應用分析和審查：Konnected，由Konnected, Inc.開發。在房屋與房產類別中列出。當前版本為1.6.5，在 28/01/2025 上更新。根據用戶在Google Play上的評論：Konnected。超過17 千的安裝。 Konnected目前有52評論，平均評分為3.0星

Konnected Alarm Panel通過將舊的預接線家庭安全系統與流行的家庭自動化平台（包括SmartThings，Home Assistant，Hubitat和OpenHAB）集成在一起，從而重振您的有線報警系統。

此應用程序可幫助您設置，發現，配置，調試和更新Konnected設備。

我們目前正在提供1.6.5版本。這是我們最新，最優化的版本。它適用於許多不同的設備。從Google Play商店或我們託管的其他版本中免費下載Apk。此外，您可以在不註冊的情況下下載且無需登錄。

我們擁有超過2000+的Samsung, Xiaomi, Huawei, Oppo, Vivo, Motorola, LG, Google, OnePlus, Sony, Tablet ...設備，並提供了許多選項，您可以輕鬆選擇適合您設備的遊戲或軟件。

如果在Google App Store上有任何國家限製或設備側面受到任何限制，它可能會派上用場。

什麼是新的

Enables discovery and configuration for GDO blaQ and GDO White with experimental Matter firmware.
Adds UI to calibrate the optical sensor on the GDO White.
Adds Alarm Panel Interface feature for configuring settings to interface Konnected with a traditional alarm system.

在Google Play商店進行評分和審查

3.0

52 全部的

5 34.0

4 14.0

3 8.0

2 8.0

1 36.0

安裝總數（*估計）

估計Google Play上安裝總數, 近似於評級數和在Google Play上達到的安裝界限.

最近的評論

Otis Mason

So people with can't find device issue. The fix is this. 1st go to your app manager and force stop the application. Then clear data. Once cleared you can reload the app and add the device by ip and port manually. The scan function does not work and untill you clear data you can't manually add it... hope it helps. Spent 3hrs with old version to find same issue.

Michael Hoke

App simply doesn't work. I'm using a Samsung S20 FE. The app is stuck on the "My Devices" page - menu selections have absolutely no effect. It looks like there is some round blue selection button just off the bottom of the screen (I can just see the top) but the app does not allow zooming out. I got it to find one of my two panels but the check mark is blued out and I can't select anything, much less rename it or do anything else. Note: works great on iPhone. 0 🌟 Android/5 🌟 iPhone.

Faulty Thinking

Bare Bones application that gets the job done. The starting screen can be a bit misleading because you would think scan is for new devices but that's for existing devices. You really want to connect it to the konnectedcloud to do anything with your devices. Follow the instructions and a little DIY spirit will get you through.

Torben Pedersen

Worked great on first install on Galaxy Note 10! Was able to get it connected to the wifi network (powered with 12v power supply) and it prompted with software and firmware updates. Both succeeded install in that order (sw, fw). Home Assistant discovered it immediately and was able to get it configured.

Jack Harrison

I'm on a Pixel 3 XL and I can't get past my devices page. I was able to get to find my device but it doesn't save it and the moment I leave the app I have to redo everything. And when I finally find the device I cant click on it. I notice several others having this issue too. I want to leave a good review but can't due to the issues.

Chuck Andraka

Does not appear to work with fixed IP addresses (Discovery off). This is a recommended setup to save bandwidth and memory on the Konnected cards, but the app cannot apparently handle this setup. Will have to flash the devices with USB cable and laptop

James

I was able to see my device through the app but then nothing useful works. Can't see sensor status or any io information from the various pins. That would be useful. This is junk. Make the firmware for the device open source btw.

Lee Dust

Doesn't work. Just closes when I tap the "SCAN NOW" button. 3/21/2021 - Tried it again to get my port number so I can integrate it into Home Assistant from fresh install on a new system. Still crashes.